What is Schluter Ditra used for?
Ditra is an uncoupling membrane designed for ceramic and stone tile installations on floors. It provides uncoupling to prevent cracked tile and grout. It is made of polyethylene creating a waterproofing layer protecting the substrate.
How much does it cost to install Schluter Ditra?
Uncoupling membrane Schluter-DITRA has the advantage of being waterproof. It is also the thinnest, ideal for use where you don’t want height buildup. DITRA (1/8”) and DITRA XL (5/16”) cost $1.35 to $2.15 per square foot for the material. Installed cost is $3.00 to $4.00.
Is Schluter Ditra necessary?
DITRA provides reliable waterproofing in interior and exterior applications. Its polyethylene composition protects the substrate from moisture penetration, which is particularly important in today’s building environment where most substrates are moisture sensitive.
How much thickness does DITRA add?
DITRA is 1/8″ (3 mm) thick, which minimizes tile assembly thickness and reduces transitions to lower surface coverings (e.g., carpet, engineered wood, and vinyl).
How much does it cost to tile $1000 square feet?
The national average range is between $1,000 and $5,000, with most people paying around $3,500 for 200 sq. ft. of 12-inch porcelain tile installed….Cost per Sq. Ft. to Install Tile Flooring.
Floor Size | Room Dimensions | Average Cost Range (Labor and Material) |
---|---|---|
1,000 sq.ft. | 20′ x 50′ | $9,000 – $214,000 |
How thick is DITRA when installed?
1/8″
DITRA is 1/8″ (3 mm) thick, which minimizes tile assembly thickness and reduces transitions to lower surface coverings (e.g., carpet, engineered wood, and vinyl). DITRA allows for ceramic tile application over single-layer plywood or OSB subfloors on joists spaced up to 19.2″ (488 mm) o.c.
Do you need DITRA on subfloor?
Ditra should be installed on plywood subfloors using modified thinset mortar, not unmodified.
Where to buy Schluter trim?
For use as a sealant,joint filling compound and to bond Kerdi and Kerdi-Band to fixed building elements
Where to purchase Schluter products?
Made of satin anodized aluminum
Where to buy Schluter boards?
Fosters creativity in the construction of bonded waterproofing assemblies to be tiled
How much does it cost to install Ditra heat?
The DITRA-XL cost is $1.75 to $2.25 per square foot. By comparison, CBU backer board cost is $0.70 to $1.10 per square foot. Many professional tile setters believe that the higher cost of DITRA is offset by the fact that it takes less time to install than CBU does due to its ease of use.