What Honda has a K20A2 engine?
K20A
Engine | Application | Compression |
---|---|---|
K20A2 | 2001–2006 Honda Civic Type R ( EDM ) | 11.0:1 |
2002–2004 Acura RSX Type S | 11.0:1 | |
2002–2004 Honda Integra Type R ( AUDM / NZDM ) | 11.0:1 | |
K20A3 | 2002–2006 Acura RSX | 9.8:1 |
How much HP does a K20A2 have?
Honda K20 and K24 Engine Specs
Honda K-Series Engine Specs | K20A | K20A2 |
---|---|---|
Horsepower: | 221 hp @ 8000 RPM | 200 hp @ 7400 RPM |
Torque: | 159 lb-ft @ 6100 RPM | 142 lb-ft @ 6000 RPM |
Bore and Stroke (in / mm): | 3.386 x 3.386 / 86 x 86 | 3.386 x 3.386 / 86 x 86 |
Compression Ratio: | 11.7.1 | 11.0:1 |
Is the K20A2 a good engine?
At the top of the enthusiast heap is the K20A2 that powers the RSX Type-S. With a lofty 7900-rpm redline, 200 hp and 142 lb-ft of torque, this engine really is as good as its hype.
What year Honda Civic has K20 engine?
The K20A is a high-performance JDM engine, which was in production from 2001 to 2011.
How do I identify a k20a engine?
Registered
- on block it should be marked k20a.
- the ECU has a sticker that should mark ‘XXX PRC XXXXX’
- intake manifold should be stamped PRC.
- type R also has a black dipstick (all others are orange)
- stick a bore scope down throught the spark plug hole & you should be able to see “PRC” or “RRC” on the piston. (
How do I identify a K20A engine?
How much power can a K20A make?
For the K20A series, the highest horsepower rating was 215hp at 8,000RPM with a peak torque of 149lb/ft at 7,000rpm. With some models producing 155hp (K20A6), others were capable a far more impressive 306hp at 6,500rpm in its stock turbocharged form (K20C1.)
Is k20a VTEC?
K20A uses a combination of VTEC-E and power-VTEC that switches between 12-valve economy mode and a 16-valve mode with a separate wild intake cam. VTC complements this VTEC variation.
Whats better K20 or K24?
The k24 is 2.4 liters and off the bat has way more torque than a k20. K24s come in Honda elements, Accords, Crvs and there is a 200hp one in the TSX. TSX will cost you 1500 bucks though. Even so these engines are cheaper, have more torque and respond to mods better.
How do I know if I have k20?
Where is the Civic Si built?
First introduced in 1986, Civic Si has been built in North America for nearly two decades, and the 2022 Civic Si continues that tradition, produced in Ontario, Canada using domestic and globally-sourced parts, with its turbocharged engine produced exclusively at the Anna, Ohio engine plant. 107.7 in. 184.0 in. 55.7 in.
What kind of engine does a Honda Civic k20c2 have?
This is a Honda Civic Type R engine for the European market. K20C2 – 158 hp (118 kW) at 6,500 rpm, 138 lb-ft (187 Nm) at 4,200 rpm. This is a Honda Civic LX engine.
What is the horsepower of a K20A2 engine?
K20A2 – 197-200 hp (147-149 kW) at 7,400 rpm, 139-142 lb-ft (188-193 Nm) at 5,900-6,000 rpm. Application: EDM Honda Civic Type R, Acura RSX Type S, and AUDM Honda Integra Type R.
Can a K20A2 power steering pump be installed in a civic?
The power steering pump of the K20A2 has to be removed and swapped with the top idler pulley from the K20A3 engine (from the Civic Si). Unbolt the A/C compressor from the K20A2 since you will be re-using the compressor that you (hopefully) left in the Civic’s engine bay. The K20A2 should be ready to be installed into the Civic.
How does VTEC work on the K20A3?
The VTEC system on engines like the K20A3 only operate on the intake cam; at low rpm only one intake valve is fully opened, the other opening just slightly to create a swirl effect in the combustion chamber for improved fuel atomization. At high rpm, both intake valves open fully to improve engine breathing.