What saw blades fit Festool ts55?
Can the saw blades with 2.2 mm cutting width be used on the TS 55 F and the TSC 55 K? Only saw blades with 1.8 mm cutting width may be used with the TS 55 F and the TSC 55 K.
What size blade does the Festool plunge saw?
The range of 160mm blades cover most popular cutting applications – with a 20mm bore size as standard: 28 Teeth x 2.2mm Kerf – for fast and semi-clean cuts wood and board materials. The blade has identical dimensions to the Festool 496302.
Are Festool saw blades good?
As always Festool is high quality. It holds an edge well and cuts great (ply, melamine, etc.) There are probably blades just as good for less (it was reduced when I bought it so I’d sill give it 5 stars at regular price but say to shop around a bit).
Can you get Festool blades sharpened?
I’ve heard many sharpening services have difficulites sharpening Festool blades and Forrest blades. Can you sharpen them? YES! This is our specialty!
What size blade does a Makita track saw use?
6 1/2
Track Saw, 6 1/2 in Blade Dia., 13/16 in Arbor Size, Max.
What is a cross cutting blade?
Crosscut blades, made for cutting across the woodgrain (across the face of a board), have between 40 and 80 teeth and are designed for clean cuts. Smaller gullets separate the teeth. Combination blades can make both rip cuts and crosscuts. They have multiple groupings of teeth separated by deep gullets.
Are Oshlun saw blades any good?
I was expecting the Oshlun blade to be a low-quality knockoff that at best would be half as good as the Festool version. I was totally wrong. This is a great blade. The cut quality is on par with Festool blades, and it stayed sharp for just as long.
Are Oshlun saw blades good?
I was skeptical considering the price but nearly everyone that’s used them says they are very good. I first put the 12″ blade on and noted that it was very sharp right out of the box. Close to being as sharp as my WWII was when new. First cut was very quiet and super smooth.
What blade comes with Festool track saw?
The saw comes with a 48-tooth fine cutting saw blade, Splinter guard, Systainer 4)all packed in a Systainer 4.
How deep can the Makita track saw cut?
2-3/16”
Cut Capacity and Settings The MAKITA track saw has a cut capacity of 2-3/16” at 90 degrees and 1-9/16” at 45 degrees. The blade location allows for and 11/16” cut from a wall, and it has a bevel capability (-1 degrees to 48 degrees) with positive stops at 22.5 degrees and 45 degrees.