What is G10 gas?
The gas meter UG-G10 is designed for measurement of gas supplied to industrial plants where maximum consumption of gas is equivalent to 16m3/h of air of density of 1,2 kg/m3. The gas meters can be used for. measurement of: ● Natural gas. ● City gas.
How do you clean Peterson Real Fyre gas logs?
1 Hold the end of the hose of a shop vac near the Real-Fyre gas logs and turn the vacuum on. 2 Brush the soot and dust from the logs with a soft-bristle brush while vacuuming it away with the shop vac. 3 Turn on the gas burner, and allow the logs to heat for approximately 10 to 15 minutes.
How many kW can a U6 meter supply?
Meter Type: Low Pressure (Diaphragm Meters) | Flow Rate kW (kilowatts | Capacity (SCFH) Standard cubic feet per hour |
U6 | 0 – 65 kW | 212 ft³/hr |
U16 | 66 – 173 kW | 565 ft³/hr |
U25 | 174 – 271 kW | 883 ft³/hr |
U40 | 272 – 430 kW | 1,412 ft³/hr |
What is a U6 gas meter?
U6 SC6 The U6/G4 is designed to meter gas usage from pilot light to central heating loads. The U6 is compact, with connection centres at 152 mm (6”), highly reliable, and built to the highest quality standards.
Which is better vented or ventless gas logs?
Ventless fireplaces are more energy efficient than vented fireplaces because no heat escapes up the flue, so you’ll save money on gas utility bills. A vented gas fireplace uses more gas to create the same level of warmth because some of its heat escapes through the flue.
Why won’t my gas logs light?
If gas is coming out of the pilot, but it still won’t light, the spark igniter could be the problem. Alleyne says to look for and clear out any debris between the igniter and thermocouple. 4. The pilot lighting, but not staying lit, indicates that the thermocouple is worn out, Worthen says.
Why is there soot on my gas logs?
Soot buildup is commonly caused by clogged burner ports and improperly positioned fire-logs. A fire-log that’s out of position can obstruct the flame path that ensures the clean-burning of gas. This contributes to soot formation on the fireplace. Another primary cause of soot is clogged gas burner ports.
Should gas logs turn black?
Soot on vented gas logs is nothing to worry about. It is a natural occurrence when the yellowish flames of a gas log impinge on a rough surface. Some people like the look, some don’t. If you don’t, we suggest that you VERY CAREFULLY take the logs outside and brush the soot off with a whisk broom.