How do you access the console on a Cisco switch?
Step 1 Locate the console port on the back of the Router/Switch. Step 2 Connect the console (or rollover) cable to the console port on the Router/Switch….Step 4 On the Port Settings tab, enter the following settings:
- Speed – 9600.
- Data Bits – 8.
- Parity – none.
- Stop bits – 1.
- Flow Control – none.
How do you access the console of a switch?
Follow the steps below to manage the switch via the console port:
- Connect your computer to the switch.
- Install a Terminal Emulator.
- Launch and Configure the Terminal Emulator.
- Step 4 Launching the CLI.
How do I console a Cisco switch using putty?
1) After downloading PuTTY, connect the console cable with Cisco Router or Swtich, double click putty.exe to execute it. Expand Connection > Serial. Enter the port number inside “Serial line to connect to” text box.
How do you check console cable is working or not?
To test if the computer COM port is functioning correctly, you can do a simple loopback test. (In a loopback test, a signal is sent from a device and returned, or looped back, to the device.) For this test, connect a serial cable to the COM port that you want to test. Then short pin 2 and pin 3 of the cable together.
What is the console port?
Console port is used to connect a computer directly to a router or switch and manage the router or switch since there is no display device for a router or switch . The console port must be used to initially to install routers onto because there is no network connection initially to connect using SSH, HTTP or HTTPS.
What is the console port on a switch?
The console port is used to connect a computer directly to a Gigabit Ethernet switch and manage the switch since there is no display device for the switch. In most cases, it is the very first step to configure your network switch.
How do I connect my Cisco console to my laptop?
Plug the serial DB-9 end of the console cable into the serial DB-9 port on your laptop. If your laptop has no serial DB-9 port, plug the serial DB-9 end of the console cable into the serial DB-9 end of a USB to serial DB-9 adapter and then into a USB port on your laptop.
What is a Cisco console cable?
Console cables — also known as Cisco cables, rollover cables and management cables — are designed for a specific purpose. They connect Cisco networking devices to terminals or PCs for configuration. Typically, the Cisco end will connect via RJ45, and the terminal end will conclude in a serial connection.