How do I identify a 289 HiPo?
Factory-installed 289 High Performance engines had the vehicle serial number stamped into the righthand side of the block near the battery’s negative-cable attachment point.
How much is a 289 HiPo engine worth?
289 HiPo/HiPo s can go for 4500 to 15K depending on setup, history and condition. It’s a 6 bolt.
What is an A code 289?
The code refers to the fifth character of the car’s VIN (vehicle identification number), and denotes the engine the car was fitted with when it left the factory. The most common are C and A, both of which refer to the 289 cu in (4.7-litre) V8 engine with either a two- or four-barrel carburettor.
How do you tell a 260 from a 289?
The fifth digit in the serial number is the engine code. If it is “F” the engine is a 260 and if it is “C” the engine is a 289.
How do I know if my Mustang is K code?
The K-Code refers to the Mustangs 289-cubic inch V8 engine. The name was given to the engine due to the K in the fifth position on the car’s chassis number. The 289 K-Code was different due to its upgraded pistons, lifter heads, connecting rods, carburettor and cylinder heads.
How do you read Ford date codes?
Most Ford panels have a date code stamped in them. It is usually part number and part alphanumeric. The first set of digits is the Month, second part is the Day, and the third part is a code for the stamping plant combined with the Shift that actually stamped the panel.
How much horsepower does a 289 HiPo have?
The 289 (1963-1968) was a high-revving, pint-sized powerhouse producing 195 and 210 horsepower in base trim (two or four barrel carburetor, respectively), and 271 horsepower in HiPo (High Performance) form.
How much horsepower does a stock 289 have?
The standard 4v 289 was factory rated at 225 hp and the hipo was 271 with torque at 300/310 .
What is a Ford 289 worth?
What Is A 1966 Ford Mustang 289 Worth?
| Engines | Median Sale |
|---|---|
| 289 CID | 225 HP | $25,463 |
| 289 CID | 271 HP | $45,000 |
| 200 CID | 120 HP | $11,600 |
| 289 CID | 200 HP | $22,400 |
How much is a 289 engine?
How much HP can a 289 make?
What is the date on this Ford 289 HiPo?
The date on this 289 HiPo is 5A27. This decodes as January 27, 1965. While detailing our 1965 GT350 Shelby Mustang, I took a few pictures showing some engine and engine component date codes on the 289 High Performance engine. These would apply to any 289 Ford and many other Ford engines.
What is a 289 Hi-Po block?
Ford used a special dye to inspect the block for minute cracks and imperfections. Essentially, Ford used “perfect” 289 blocks as the starting point for the Hi-Po and then added the coveted larger heavy-duty main caps for strength.
When did the 289 high performance engine come out?
This decodes as January 27, 1965. While detailing our 1965 GT350 Shelby Mustang, I took a few pictures showing some engine and engine component date codes on the 289 High Performance engine. These would apply to any 289 Ford and many other Ford engines. The Engine Assembly Date is stamped on the pad in front of the LH cylinder head.
What kind of intake manifold does a HiPo 289 have?
The iron manifold is identical to those used on the A-code 289 and only needs to match your Mustang’s model year and build date codes. Ford never installed an aluminum intake manifold on the Hi-Po 289.