How do I configure my router console port?

How do I configure my router console port?

Step 1 Locate the console port on the back of the Router/Switch. Step 2 Connect the console (or rollover) cable to the console port on the Router/Switch. Step 3 Use the correct adapter to connect the other end of the cable to your terminal or PC.

How do I check my cisco router settings?

Show running-config: To display the configuration information currently running on the terminal, use the show running-config EXEC command. This command replaces the write terminal command.

How to configure a Cisco 1841 router from scratch?

Set up a console connection to your router. The following message is displayed: …

Press Return. The following message is displayed: Cisco Configuration Professional Express (Cisco CP Express) is installed on this device.

Enter the username username1,and press Return or Enter.

Enter the password password1,and press Return or Enter.

How to enable IPv6 on Cisco Rouer 1841?

RIPng. It’s a distance vector protocol. The hop-count limit is 15.

EIGRPv6. As with RIPng,EIGRPv6 works much the same as its IPv4 predecessor does—most of the features that EIGRP provided before EIGRPv6 will still be available.

OSPFv3. The new version of OSPF continues the trend of the routing protocols having many similarities with their IPv4 versions.

How to create DHCP server on 1841 router?

Here is an example of configuring a router to act as a DHCP server. First you may want to exclude addresses such as the router interface address:! ip dhcp excluded-address 172.18.80.97 ! then you configure the DHCP pool with the subnet of addresses that it should use:! ip dhcp pool example_pool. network 172.18.80.96 255.255.255.224

What is basic configuration of Cisco routers?

basic configuration of cisco router will include . 1) interface ip address . 2) default route . 3) static / rip routing as per req . 4) password for various modes.